SIMA INTERNATIONAL

PCI 64 BIT BUS EXTENDERS

PCI 64 bit Bus Extenders - Wearout, Right Angle, Flexible, and Flexible Right Angle extenders

**Please note that for small quantities, our standard lead time is approximately one week (not guaranteed though). The shipping option you choose is not related to the lead time.**

pcisx8 pci 64 bit wearout extender PCISX8 - PCI Wearout Extender
PCISX8 is a 64 bit, wearout extender, designed to go on top of the PCIX64 and PCIEX8 extenders. It is a short and low cost extender designed to be worn out after 2000-5000 cycles of insertion. Its purpose is to prolong the life of the other extenders in a heavily used environment. It can also be used to prevent the I/O board's gold fingers from being damaged, when I/O boards are used to test the motherboards repeatedly. To order, add -3 for VIO=3.3V version, -5 for VIO=5V version. The dimension is 6.65" L x 1.1" H.

 
$23.58
VIO Version

Quantity:

PCITX8-1 - PCI 64 bit Right Angle Riser Card, Short, for 2U chassis
pcitx8-1-a pci 64 bit right angle riser,short, a side pcitx8-1-b pci 64 bit right angle riser,short, b side PCITX8-1 is a 64 bit right angle PCI riser that can turn in either direction. It is designed for short chassis, such as the 2U chassis. This riser supports the PCIX mode. User must specify VIO version and the side where the connector is mounted when placing an order. An on-board jumper allows VIO conversion, so a 3.3V I/O board can be used in a 5V slot, and vice versa. To order, specify -3 for VIO=3.3V, -5 for VIO=5V, -5/3 for 5V card in a 3.3V slot, -3/5 for 3.3V card in a 5V slot. Also, add -A for connector on A side or -B for connector on B side of the extender. When user's I/O board is inserted on B side, it will be parallel to the motherboard with component side down. The overall dimension of the PCITX8-1 is 5.24"L X 1.28"H The connector center height is 1.03" for 1B or 0.63" for 1A.

 
$23.58
VIO Version           Connector Side

Quantity:

PCITX8-2 - PCI 64 bit Right Angle Riser Card, Tall, for 2U chassis
pcitx8-2-a pci 64 bit right angle extender, tall, a side pcitx8-2-b pci 64 bit right angle riser, tall, b side PCITX8-2 is a 64 bit right angle PCI riser that can turn in either direction. It is designed for short chassis, such as the 2U chassis. The height of the PCITX8-2 is designed to clear that of PCITX8-1, so that two PCI I/O boards can be inserted in parallel with the motherboard in the same direction. Both risers support the PCIX mode. User must specify VIO version and the side where the connector is mounted when placing an order. An on-board jumper allows VIO conversion, so a 3.3V I/O board can be used in a 5V slot, and vice versa. To order, specify -3 for VIO=3.3V, -5 for VIO=5V, -5/3 for 5V card in a 3.3V slot, -3/5 for 3.3V card in a 5V slot. Also, add -A for connector on A side or -B for connector on B side of the extender. When user's I/O board is inserted on B side, it will be parallel to the motherboard with component side down. The overall dimension of the PCITX8-2 is 5.24"L X 2.08"H. The connector center height is 1.83" for 2B or 1.43" for 2A.

 
$23.58
VIO Version           Connector Side

Quantity:

pcitx8-3 pci 64 bit right angle riser PCITX8-3 - PCI 64 bit Right Angle Riser Card
PCITX8-3 is a PCI 64 bit right angle extender that turns on B side only. It is designed for the 1U/2U chassis, and it supports the PCIX mode. When user's I/O board is inserted, it will be parallel to the motherboard with component side down. An on-board jumper allows VIO conversion, so a 3.3V I/O board can be used in a 5V slot, and vice versa. To order, specify -3 for VIO=3.3V, -5 for VIO=5V, -5/3 for 5V card in a 3.3V slot, -3/5 for 3.3V card in a 5V slot. The overall dimension of the PCITX8-3 is 5.32"L X 1.08"H The connector center height is 0.88". User can order the goldfinger and the connector to be either 3.3V, 5V or mixed.

 
$23.58
VIO Version

Quantity:

pcitx8-4 pci 64 bit right angle riser PCITX8-4 - PCI 64 bit Right Angle Riser Card, for 1U chassis
PCITX8-4 is the shortest PCI 64 bit right angle riser, featuring slim PCI connector. It is designed with connector on A side only. When user's I/O board is inserted on A side, it will be parallel to the motherboard with component side up. The overall dimension of the PCITX8-4 is 5.24"L X 0.57"H The connector center height is 0.43".

 
$23.58
Quantity:

pcitx8-5 pci 64 bit right angle riser PCITX8-5 - PCI 64 bit Right Angle Riser Card, for 1U chassis
PCITX8-5 is a PCI 64 bit right angle riser (A side only). It is designed for the 1U chassis. When user's I/O board is inserted on A side, it will be parallel to the motherboard with component side up. The overall dimension of the PCITX8-5 is 5.24"L X 0.75"H The connector center height is 0.55".

 
$23.58
Quantity:

pcitx8-6 pci 64 bit right angle riser PCITX8-6 - PCI 64 bit Right Angle Riser Card, for 1U chassis
PCITX8-6 is a PCI 64 bit right angle riser (B side only). It is designed for the 1U chassis and it supports the PCIX mode. An on-board jumper allows VIO conversion, so a 3.3V I/O board can be used in a 5V slot, and vice versa. To order, specify -3 for VIO=3.3V, -5 for VIO=5V, -5/3 for 5V card in a 3.3V slot, -3/5 for 3.3V card in a 5V slot. When user's I/O board is inserted on B side, it will be parallel to the motherboard with component side down. The overall dimension of the PCITX8-6 is 5.24"L X 0.96"H The connector center height is 0.76".

 
$23.58
VIO Version

Quantity:

PCITX8-7 - PCI 64 bit Right Angle Riser Card
pcitx8-7a pci 64 bit right angle riser, a side pcitx8-7b pci 64 bit right angle riser, b side PCITX8-7 is a 64 bit right angle PCI riser that can turn in either direction. User must specify VIO version and the side where the connector is mounted when placing an order. Add -3 for VIO=3.3V version or -5 for VIO=5V version (default). Add -A for connector on A side or -B for connector on B side of the extender. When user's I/O board is inserted on A side, it will be parallel to the motherboard with component side up. The overall dimension of the PCITX8-7 is 5.24"L X 2.58"H The connector center height is 2.32" for 7B or 1.92" for 7A.

 
$23.58
VIO Version           Connector Side

Quantity:

PCI-FLEX64 - PCI Flexible Extender, 64 bit
pci-flex-64-fm pci flexible extender, 64 bit, female-male pci-flex-64-mm pci flexible extender, 64 bit, male-male PCI-FLEX64 is a PCI 64 bit Flexible Extender. It is available in Male to Male (-MM), Female to Female (-FF) and Female to Male (-FM) versions. In the -MM and -FF versions, the A/B connection is swapped, in order to maintain the A to A, B to B connections. A non-swap, -NS version is available upon request. The -FM version is default to non-swap. The cable can be folded to provide offset. The goldfinger end piece PCB is about 0.58" tall. The overall dimension for the -MM version with 3" cable is about 3.95"H x 5.6"W. The overall dimension for the -FM version with 3" cable is about 4.5"H x 5.6"W.

 
$48.30
Version                 Cable Length(Inches)

Quantity:

PCIRX-FLEX64 - PCI Flexible Right Angle Extender, 64 bit
pcirx-flex64-a pci flexible right angle extender, 64 bit, a side pcirx-flex64-b pci flexible right angle extender, 64 bit, b side PCIRX-FLEX64 is a PCI 64 bit Right Angle Flexible Extender. It is available in A side, B side and 5.0VIO, 3.3VIO versions. The goldfinger end piece PCB is about 0.58" tall. The overall dimension, with a 3" cable, is about 4.1"H x 5.85"W.

 
$48.30
VIO Version           Connector Side         Cable Length(Inches)

Quantity:

free hit counter
free hit counter