SIMA INTERNATIONAL
view cart
HOME
www.simaintl.com
PCI 32 BIT BUS EXTENDERS
PCI 64 BIT BUS EXTENDERS
AL/PET TAPE (ALUMINUM MYLAR TAPE)
INDUSTRIAL POWER STRIPS
FAQ (RISER CARDS)
TERMS AND CONDITIONS
PCI EXPRESS EXTENDERS

PCI EXPRESS Bus Extenders - Right Angle, Flexible, Flexible Right Angle and Wearout extenders

**Please note that for small quantities, our standard lead time is approximately one week (not guaranteed though). The shipping option you choose is not related to the lead time.**

view cart
HOME
www.simaintl.com
PCI 32 BIT BUS EXTENDERS
PCI 64 BIT BUS EXTENDERS
AL/PET TAPE (ALUMINUM MYLAR TAPE)
INDUSTRIAL POWER STRIPS
FAQ (RISER CARDS)
TERMS AND CONDITIONS
pexp1-rx1 pci express x1 short right angle riser PEXP1-RX1 - PCI Express X1 Short Right Angle Riser Card
PEXP1-RX1 is the right angle riser for the PCI Express X1 buses. The connector is soldered on the component side (B side) of the board. When an I/O board is inserted, the component side of the I/O board will face down, towards the motherboard. This riser has a height of 1.22". It is designed to line up with the lowest panel cutout of a 2U chassis. The connector center height is 1.05", and the width is 1.72".

 
$19.55
Quantity:

pexp4-rx1 pci express x4 short right angle riser PEXP4-RX1 - PCI Express X4 Short Right Angle Riser Card
PEXP4-RX1 is the right angle riser for the PCI Express X4 bus. The connector is soldered on the component side (B side) of the board. When an I/O board is inserted, the component side of the I/O board will face down, towards the motherboard.This riser has a height of 1.22". It is designed to line up with the lowest panel cutout of a 2U chassis. The connector center height is 1.05", and the width is 2.27".

 
$20.70
Quantity:

pexp8-rx1 pci express x8 short right angle riser PEXP8-RX1 - PCI Express X8 Short Right Angle Riser Card
PEXP8-RX1 is the right angle riser for the PCI Express X8 bus. The connector is soldered on the component side (B side) of the board. When an I/O board is inserted, the component side of the I/O board will face down, towards the motherboard. This riser has a height of 1.22". It is designed to line up with the lowest panel cutout of a 2U chassis. The connector center height is 1.05", and the width is 2.94".

 
$22.43
Quantity:

pexp16-rx1 pci express x16 short right angle riser PEXP16-RX1 - PCI Express X16 Short Right Angle Riser Card
PEXP16-RX1 is the right angle riser for the PCI Express X16 bus. The connector is soldered on the component side (B side) of the board. When an I/O board is inserted, the component side of the I/O board will face down, towards the motherboard. This riser has a height of 1.22". It is designed to line up with the lowest panel cutout of a 2U chassis. The connector center height is 1.05", and the width is 4.24".

 
$23.58
Quantity:

pexp16-rx1e pci express x16 short right angle riser, extended PEXP16-RX1E - PCI Express X16 Short Right Angle Riser Card (Extended)
PEXP16-RX1E is the right angle riser for the PCI Express X16 bus. The connector is soldered on the component side (B side) of the board. When an I/O board is inserted, the component side of the I/O board will face down, towards the motherboard. This riser has a height of 1.22". It is designed to line up with the lowest panel cutout of a 2U chassis. The connector center height is 1.05", and the width is 5.79". The PEXP16-RX1E is extended to the edge of the chassis, with holes for easier mounting.

 
$23.58
Quantity:

pexp1-rx2 pci express x1 medium right angle riser PEXP1-RX2 - PCI Express X1 Medium Height Right Angle Riser Card
PEXP1-RX2 is the right angle riser for the PCI Express X1 bus. The connector is soldered on the component side (B side) of the board. When an I/O board is inserted, the component side of the I/O board will face down, towards the motherboard. This riser has a height of 2.02". It is designed to line up with the middle panel cutout of a 2U chassis. The connector center height is 1.85", and the width is 1.72".

 
$20.70
Quantity:

pexp4-rx2 pci express x4 medium right angle riser PEXP4-RX2 - PCI Express X4 Medium Height Right Angle Riser Card
PEXP4-RX2 is the right angle riser for the PCI Express X4 bus. The connector is soldered on the component side (B side) of the board. When an I/O board is inserted, the component side of the I/O board will face down, towards the motherboard. This riser has a height of 2.02". It is designed to line up with the middle panel cutout of a 2U chassis. The connector center height is 1.85", and the width is 2.27".

 
$22.43
Quantity:

pexp8-rx2 pci express x8 medium right angle riser PEXP8-RX2 - PCI Express X8 Meduim Height Right Angle Riser Card
PEXP8-RX2 is the right angle riser for the PCI Express X8 bus. The connector is soldered on the component side (B side) of the board. When an I/O board is inserted, the component side of the I/O board will face down, towards the motherboard. This riser has a height of 2.02". It is designed to line up with the middle panel cutout of a 2U chassis. The connector center height is 1.85", and the width is 2.94".

 
$23.58
Quantity:

pexp16-rx2 pci express x16 medium right angle riser PEXP16-RX2 - PCI Express X16 Medium Height Right Angle Riser Card
PEXP16-RX2 is the right angle riser for the PCI Express X16 bus. The connector is soldered on the component side (B side) of the board. When an I/O board is inserted, the component side of the I/O board will face down, towards the motherboard. This riser has a height of 2.02". It is designed to line up with the middle panel cutout of a 2U chassis. The connector center height is 1.85", and the width is 4.24".

 
$24.73
Quantity:

pexp16-rx2e pci express x16 medium right angle riser, extended PEXP16-RX2E - PCI Express X16 Medium Height Right Angle Riser Card (Extended)
PEXP16-RX2E is the right angle riser for the PCI Express X16 bus. The connector is soldered on the component side (B side) of the board. When an I/O board is inserted, the component side of the I/O board will face down, towards the motherboard. This riser has a height of 2.02". It is designed to line up with the middle panel cutout of a 2U chassis. The connector center height is 1.85", and the width is 5.79". The PEXP16-RX2E is extended to the edge of the chassis, with holes for easier mounting.

 
$24.73
Quantity:

pexp1-rx3 pci express x1 tall right angle riser PEXP1-RX3 - PCI Express X1 Tall Right Angle Riser Card
PEXP1-RX3 is right angle riser for the PCI Express X1 bus. The connector is soldered on the component side (B side) of the board. When an I/O board is inserted, the component side of the I/O board will face down, towards the motherboard. This riser has a height of 2.82". It is designed to line up with the top panel cutout of a three cut 2U chassis. The connector center height is 2.65", and the width is 1.72".

 
$22.43
Quantity:

pexp4-rx3 pci express x4 tall right angle riser PEXP4-RX3 - PCI Express X4 Tall Right Angle Riser Card
PEXP4-RX3 is the right angle riser for the PCI Express X4 bus. The connector is soldered on the component side (B side) of the board. When an I/O board is inserted, the component side of the I/O board will face down, towards the motherboard. This riser has a height of 2.82". It is designed to line up with the top panel cutout of a three cut 2U chassis. The connector center height is 2.65", and the width is 2.27".

 
$23.58
Quantity:

pexp8-rx3 pci express x8 tall right angle riser PEXP8-RX3 - PCI Express X8 Tall Right Angle Riser Card
PEXP8-RX3 is the right angle riser for the PCI Express X8 bus. The connector is soldered on the component side (B side) of the board. When an I/O board is inserted, the component side of the I/O board will face down, towards the motherboard. This riser has a height of 2.82". It is designed to line up with the top panel cutout of a three cut 2U chassis. The connector center height is 2.65", and the width is 2.94".

 
$25.88
Quantity:

pexp16-rx3 pci express x16 tall right angle riser PEXP16-RX3 - PCI Express X16 Tall Right Angle Riser Card
PEXP16-RX3 is the right angle riser for the PCI Express X16 bus. The connector is soldered on the component side (B side) of the board. When an I/O board is inserted, the component side of the I/O board will face down, towards the motherboard. This riser has a height of 2.82". It is designed to line up with the top panel cutout of a three cut 2U chassis. The connector center height is 2.65", and the width is 4.24".

 
$27.03
Quantity:

pexp8-rx1a pci express x8 right angle riser, a side mount, low height PEXP8-RX1A - PCI Express X8 Right Angle Riser Card (A Side), Low Height
PEXP8-RX1A is a PCI EXPRESS X8 right angle extender. The connector on the riser is facing the A side. The connector center is 0.635" (16.13mm) tall. The overall dimension of the riser is 3.01"(76.45mm) L x 1.0"(25.4mm) H.

 
$22.43
Quantity:

pexp8-rx2a pci express x8 right angle riser, a side mount, mid height PEXP8-RX2A - PCI Express X8 Right Angle Riser Card (A side), Medium Height
PEXP8-RX2A is a PCI EXPRESS X8 right angle extender. The connector on the riser is facing the A side. The connector center is 1.36" ( 34.65mm) tall. The overall dimension of the riser is 4.14"(105.05mm) L x 1.53"(38.78mm) H.

 
$24.73
Quantity:

pexp1-sx pci express x1 wearout extender
PEXP1-SX - PCI Express X1 Wearout Extender
PEXP1-SX is a wearout extender, designed to go on top of the PCI Express Bus Isolation or other extenders. This is a short and low cost extender with heavy duty connectors of 2000 - 3000 insertion cycles. Its purpose is to prolong the life of other connector contacts or gold fingers in heavily used environments. The wearout extender has a height of 1.05", and the width is 1.72".

 
$19.55
Quantity:
pexp4-sx pci express x4 wearout extender PEXP4-SX - PCI Express X4 Wearout Extender
PEXP4-SX is a wearout extender, designed to go on top of the PCI Express Bus Isolation or other extenders. This is a short and low cost extender with heavy duty connectors of 2000 - 3000 insertion cycles. Its purpose is to prolong the life of other connector contacts or gold fingers in heavily used environments. The wearout extender has a height of 1.05", and the width is 2.27".

 
$20.70
Quantity:

pexp8-sx pci express x8 wearout extender PEXP8-SX - PCI Express X8 Wearout Extender
PEXP8-SX is a wearout extender, designed to go on top of the PCI Express Bus Isolation or other extenders. This is a short and low cost extender with heavy duty connectors of 2000 - 3000 insertion cycles. Its purpose is to prolong the life of other connector contacts or gold fingers in heavily used environments. The wearout extender has a height of 1.05", and the width is 2.94".

 
$22.43
Quantity:

pexp16-sx pci express x16 wearout extender PEXP16-SX - PCI Express X16 Wearout Extender
PEXP16-SX is a wearout extender, designed to go on top of the PCI Express Bus Isolation or other extenders. This is a short and low cost extender with heavy duty connectors of 2000 - 3000 insertion cycles. Its purpose is to prolong the life of other connector contacts or gold fingers in heavily used environments. The wearout extender has a height of 1.05", and the width is 4.24".

 
$23.58
Quantity:

pexp4-sx-4-1 pci express x4 lane converter/wearout extender PEXP4-SX-4/1 - PCI Express X4 Lane Converter Wearout Extender
PEXP4-SX-4/1 is a X4 to X1 lane converter. This extender is designed to have higher channel connectors and lower channel PCB gold fingers. This extender has heavy duty connectors of 2000 - 3000 insertion cycles. This extender has a height of 1.05", and the width is 2.27". Other combinations of lane reduction extenders are possible with slight modifications, upon request.

 
$25.88
Quantity:

pexp8-sx-8-4 pci express x8 lane converter/wearout extender PEXP8-SX-8/4 - PCI Express X8 Lane Converter/Wearout Extender
PEXP8-SX-8/4 is a X8 to X4 lane converter. This extender is designed to have higher channel connectors and lower channel PCB gold fingers. This extender has heavy duty connectors of 2000 - 3000 insertion cycles. This extender has a height of 1.05", and the width is 2.94". Other combinations of lane reduction extenders are possible with slight modifications, upon request.

 
$28.18
Quantity:

pexp16-sx-16-8 pci express x16 lane converter/wearout extender PEXP16-SX-16/8 - PCI Express X16 Lane Converter/Wearout Extender
PEXP16-SX-16/8 is a X16 to X8 lane converter. This extender is designed to have higher channel connectors and lower channel PCB gold fingers. This extender has heavy duty connectors of 2000 - 3000 insertion cycles. This extender has a height of 1.05", and the width is 4.24". Other combinations of lane reduction extenders are possible with slight modifications, upon request.

 
$31.05
Quantity:

pexp16-sx-16-1 pci express x16 lane converter/wearout extender PEXP16-SX-16/1 - PCI Express X16 Lane Converter/Wearout Extender
PEXP16-SX-16/1 is a X16 to X1 lane converter. This extender is designed to have higher channel connectors and lower channel PCB gold fingers. This extender has heavy duty connectors of 2000 - 3000 insertion cycles. This extender has a height of 1.05", and the width is 4.24". Other combinations of lane reduction extenders are possible with slight modifications, upon request.

 
$31.05
Quantity:

pe-flex1 pci express x1 flexible extender PE-FLEX1 - PCI Express X1 Flexible Extenders
PE-FLEX1 is a flexible extender for PCI Express X1 bus. The Minimum cable length is 1". User can order any cable length up to 15". If not specified, the standard cable length defaults to 3". The overall extender length with a 3" cable is about 4.25". The part shown above is the F-M version. The M-M, F-F and the CX (TX/RX crossed) versions are also available. For the M-M and F-F versions, the cable connection is swapped in order to maintain the A to A, B to B connections. A non-swap, -NS version is available upon request. The F-M version is default to non-swap. This is the GEN1 version. For GEN2 compatible cables, please see product PE-FLEX1-G2.

 
$43.13
Version                 Cable Length(Inches)

Quantity:

pe-flex1-g2 pci express x1 flexible extender, gen. 2 PE-FLEX1-G2 - PCI Express X1 Flexible Extender, Gen. 2
PE-FLEX1-G2 is a flexible extender for PCI Express X1 bus. The Minimum cable length is 1". User can order any cable length up to 15". If not specified, the standard cable length defaults to 3". The overall extender length with a 3" cable is about 4.25". The part shown above is the F-M version. The M-M, F-F and the CX (TX/RX crossed) versions are also available. For the M-M and F-F versions, the cable connection is swapped in order to maintain the A to A, B to B connections. A non-swap, -NS version is available upon request. The F-M version is default to non-swap. This is the GEN2 version. The GEN2 version is limited to 12" maximum cable length.

 
$48.88
Version                 Cable Length(Inches)

Quantity:

pe-flex4 pci express x4 flexible extender PE-FLEX4 - PCI Express X4 Flexible Extender
PE-FLEX4 is a flexible extender for PCI Express X4 bus. The Minimum cable length is 1". User can order any cable length up to 15". If not specified, the standard cable length defaults to 3". The overall extender length with a 3" cable is about 4.25". The part shown above is the F-M version. The M-M, F-F and the CX (TX/RX crossed) versions are also available. For the M-M and F-F versions, the cable connection is swapped in order to maintain the A to A, B to B connections. A non-swap, -NS version is available upon request. The F-M version is default to non-swap. This is the GEN1 version. For GEN2 compatible cables, please see product PE-FLEX4-G2.

 
$44.28
Version                 Cable Length(Inches)

Quantity:

pe-flex4-g2 pci express x4 flexible extender, gen. 2 PE-FLEX4-G2 - PCI Express X4 Flexible Extender, Gen. 2
PE-FLEX4-G2 is a flexible extender for PCI Express X4 bus. The Minimum cable length is 1". User can order any cable length up to 15". If not specified, the standard cable length defaults to 3". The overall extender length with a 3" cable is about 4.25". The part shown above is the F-M version. The M-M, F-F and the CX (TX/RX crossed) versions are also available. For the M-M and F-F versions, the cable connection is swapped in order to maintain the A to A, B to B connections. A non-swap, -NS version is available upon request. The F-M version is default to non-swap. This is the GEN2 version. The GEN2 version is limited to 12" maximum cable length.

 
$50.03
Version                 Cable Length(Inches)

Quantity:

pe-flex8 pci express x8 flexible extender PE-FLEX8 - PCI Express X8 Flexible Extender
PE-FLEX8 is a flexible extender for PCI Express X8 bus. The Minimum cable length is 1". User can order any cable length up to 15". If not specified, the standard cable length defaults to 3". The overall extender length with a 3" cable is about 4.25". The part shown above is the F-M version. The M-M, F-F and the CX (TX/RX crossed) versions are also available. For the M-M and F-F versions, the cable connection is swapped in order to maintain the A to A, B to B connections. A non-swap, -NS version is available upon request. The F-M version is default to non-swap. This is the GEN1 version. For GEN2 compatible cables, please see product PE-FLEX8-G2.

 
$46.58
Version                 Cable Length(Inches)

Quantity:

pe-flex8-g2 pci express x8 flexible extender, gen.2 PE-FLEX8-G2 - PCI Express X8 Flexible Extender, Gen. 2
PE-FLEX8-G2 is a flexible extender for PCI Express X8 bus. The Minimum cable length is 1". User can order any cable length up to 15". If not specified, the standard cable length defaults to 3". The overall extender length with a 3" cable is about 4.25". The part shown above is the F-M version. The M-M, F-F and the CX (TX/RX crossed) versions are also available. For the M-M and F-F versions, the cable connection is swapped in order to maintain the A to A, B to B connections. A non-swap, -NS version is available upon request. The F-M version is default to non-swap. This is the GEN2 version. The GEN2 version is limited to 12" maximum cable length.

 
$52.33
Version                 Cable Length(Inches)

Quantity:

pe-flex16 pci express x16 flexible extender PE-FLEX16 - PCI Express X16 Flexible Extender
PE-FLEX16 is a flexible extender for PCI Express X16 bus. The Minimum cable length is 1". User can order any cable length up to 15". If not specified, the standard cable length defaults to 3". The overall extender length with a 3" cable is about 4.25". The part shown above is the F-M version. The M-M, F-F and the CX (TX/RX crossed) versions are also available. For the M-M and F-F versions, the cable connection is swapped in order to maintain the A to A, B to B connections. A non-swap, -NS version is available upon request. The F-M version is default to non-swap. This is the GEN1 version. For GEN2 compatible cables, please see product PE-FLEX16-G2.

 
$49.45
Version                 Cable Length(Inches)

Quantity:

pe-flex16-g2 pci express x16 flexible extender, gen. 2 PE-FLEX16-G2 - PCI Express X16 Flexible Extender, Gen. 2
PE-FLEX16-G2 is a flexible extender for PCI Express X16 bus. The Minimum cable length is 1". User can order any cable length up to 15". If not specified, the standard cable length defaults to 3". The overall extender length with a 3" cable is about 4.25". The part shown above is the F-M version. The M-M, F-F and the CX (TX/RX crossed) versions are also available. For the M-M and F-F versions, the cable connection is swapped in order to maintain the A to A, B to B connections. A non-swap, -NS version is available upon request. The F-M version is default to non-swap. This is the GEN2 version. The GEN2 version is limited to 12" maximum cable length.

 
$55.20
Version                 Cable Length(Inches)

Quantity:

pe-flex1r pci express x1 flexible right angle extender PE-FLEX1R - PCI Express X1 Flexible Right Angle Extender
PE-FLEX1R is a right angle flexible extender for PCI Express X1 buses. The Minimum cable length is 1". User can order any cable length up to 15" (12" for GEN 2 version). If not specified, the standard cable length defaults to 3". The X1 is B side facing only. The overall extender length with a 3" cable is about 4.2".

 
$43.13
GEN Version                       Cable Length(Inches)

Quantity:

pe-flex4r pci express x4 flexible right angle extender PE-FLEX4R - PCI Express X4 Flexible Right Angle Extender
PE-FLEX4R is a right angle flexible extender for PCI Express X4 buses. The Minimum cable length is 1". User can order any cable length up to 15" (12" for GEN 2 version). If not specified, the standard cable length defaults to 3". The X4 is B side facing only. The overall extender length with a 3" cable is about 4.2".

 
$44.28
GEN Version                       Cable Length(Inches)

Quantity:

pe-flex8r pci express x8 flexible right angle extender PE-FLEX8R - PCI Express X8 Flexible Right Angle Extender
PE-FLEX8R is a right angle flexible extender for PCI Express X8 buses. The Minimum cable length is 1". User can order any cable length up to 15" (12" for GEN 2 version). If not specified, the standard cable length defaults to 3". The X8 is B side facing only. The overall extender length with a 3" cable is about 4.2".

 
$46.58
GEN Version                       Cable Length(Inches)

Quantity:

pe-flex16r pci express x16 flexible right angle extender PE-FLEX16R - PCI Express X16 Flexible Right Angle Extender
PE-FLEX16R is a right angle flexible extender for PCI Express X16 buses. The Minimum cable length is 1". User can order any cable length up to 15" (12" for GEN 2 version). For the PE-FLEX16R, there are two versions, with connector mounted at the B side (-B) or the A side (-A). If not specified, the standard cable length defaults to 3" and the connector defaults to the B side. The overall extender length with a 3" cable is about 4.2".

 
$49.45
GEN Version                           A-B Version           Cable Length(Inches)

Quantity:

Contact Us

HOME / INDUSTRIAL POWER STRIPS / PCI EXPRESS EXTENDERS / PCI 32 BIT BUS EXTENDERS / PCI 64 BIT BUS EXTENDERS / AL/PET (ALUMINUM MYLAR) TAPE / TERMS AND CONDITIONS

 

© 2008, Sima International
Irvine, CA
Email: sales@simaintl.com; Website: http://www.simaintl.com
free hit counter
free hit counter